zConnect 8ch switch module

$60.00

Please login to see trade price

Availability: In Stock

The zConnect 8ch switch module supports encrypted communications via the Security Command Class to prevent hacking and supports the Over the Air (OTA) feature for the product’s firmware upgrade (subject to availability on your Z-Wave Gateway).

SKU: ZCO-CON-ZWS Categories: ,

Description

Quick Overview

This zConnect 8ch switch module is a wireless Z-Wave enabled device and is fully compatible with any Z-wave network with the same region Radio Frequency. The zConnect 8ch switch module is designed for residential and light commercial usage, primarily for integration with Z-Wave home automation controllers such as Fibaro HC3/Lite, Yubii Home Controller or similar.

There are situations when you want to install an additional wall switch or you want to operate multiple light circuits around the house from one switch. Or you would like to have two or three-way switching. Two-three-way switching means having two-three or more switches in different locations to control one lamp.
To do it traditionally will cost you a fortune. Just imagine the bill for the ripping off plaster, running wires, and installing new plaster with the paint job.

However, if you have already installed the Z-Way network it is possible to do it with minimal cost. Install only one additional Z-Wave device – zConnect 8ch switch module.

Product Details

The zConnect 8ch switch module is a Z-Wave device that can control via associations with other Z-Wave network devices using up to 8 switches connected to it. The Two-Way switching module can be connected to an optional (two-wire) Temperature Probe. The device is powered by a 1/2 AA battery (ER14250) or an alternative 12-24V DC power source.zConnect 8ch switch module – can control other Z-Wave devices using standard switches connected to it.  The device supports commands such as: turn on, turn off, dim, as well as start scenes on the central controller.

The zConnect 8ch switch module supports encrypted communications via the Security Command Class to prevent hacking and supports the Over the Air (OTA) feature for the product’s firmware upgrade (subject to availability on your Z-Wave Gateway).

This device was designed and assembled in Australia.

 ZConnect 8ch Switch

  • Allows you to control Z-Wave devices via wireless connection;
  • Battery life up to 4 years (2-3 clicks a day);
  • Can be powered with 12-24V DC power source;
  • Can be connected up to 8 switches/relays/dimmers;
  • Can operate independently from the central controller;
  • Has a low battery charge indicator;
  • Easy-to-use connectors;
  • Optional temperature-humidity sensor

Product Support

Please note: If you are installing the entire Z-Wave™ system for the first time, please refer to the installation guide of your Z-Wave Gateway before installing this device.

Manuals:

⇒ User Manual (Size: 1.6Mb)

Technical Specifications

RF Protocol
Z-Wave, SDK version: 6.51.03
RF Frequency
921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Application
Indoor use only, for outdoor use watertight plastic box
Power
1/2 AA(ER14250) or 5-24 VDC
Operation Range
Up to 45m indoors with no obstacles
Enclosure
Plastic
Compliance
EN 60669-2-1
Operating Temp.  -10C ~ +40C
Dimensions
18mm x 48mm x 37mm

Additional information

Weight 0.1800 kg
Dimensions 20.0000 × 10.0000 × 10.0000 cm

Reviews

There are no reviews yet.

Be the first to review “zConnect 8ch switch module”