Description
Quick Overview
ITR5031-AU4 series Push Button Interface AU device is the newest products of Interra Technology. The Interra Push Button Interface AU are designed for using at mainly in interior areas of buildings.
The Interra Push Button Interface serve as interfaces for operation of KNX systems via conventional buttons/switches or for coupling of binary signals (signal contacts). The devices feature a push button for manual operation for each input. Input states can be simulated during manual operation, so that the conventional push buttons, switches or floating contacts do not need to be connected for commissioning purposes. The connection to the Push Button Interface is established using the front side bus connection terminal
All versions have a rear connector with 8 digital inputs that can be connected to buttons and used for switch sensor, switch/dimming sensor, shutter sensor, value/forced operation, control scene, RGB colour control, RGBW control, mode selection and command sequence.
Interra Push Button Interface has 5 logic function blocks and can be set the logical relation AND/OR/XOR. Each block can control 5 output objects.
Documents
Videos / YouTube:
⇒Introduction – Configuration – Demonstration
Technical Specifications
|
Product Name |
Push Button Interface AU |
|
Product Code |
ITR5031-AU4 |
|
Power Supply |
KNX Power Supply |
|
Current Consumption |
5 mA |
|
Input Measurament – Voltage |
3.3 V DC |
|
Current |
0.55 mA* |
|
Inputs |
4 |
|
Mode of Commissioning |
S-Mode |
|
Type of Protection |
IP 20 |
|
Temperature Range |
Operation (-5°C…45°C) Storage (-25°C…60°C) |
| Square tangential detection zone | 7 x 7 m max. (49m²) |
| Reach mechanically adjustable | Yes |
| Sensor system | 13 detection levels, 1760 switching zones |
| Settings | by means of ETS software, remote control or bus |
| Lighting channels Light 1 – Light 4 | Switching/dimming, switching mode, constant lighting control, stay-ON time |
| Basic brightness | Permanently ON, 1 – 255 min, 10-50% = all night |
| Switch-‘ON’ delay | Room surveillance, 0-255 min., Stay-ON time 1-255 min. |
| Presence stay “ON” time output | 1-255 sec. or 1-255 min. |
| HVAC output | depending on presence |
| Further outputs | Light level, sabotage protection |
| Light level output | in lux |
| Degree of protection (IP) | IP20 |
| IP rating with AP Box (surface-mounting box) | IP54 |
| Protection class | II |
| Temperature range | -25-+55 |
| Interface | KNX |
| Colour |
Light Grey |
|
Dimensions |
40 x 10 x 40 mm (W x L x H) |
|
Configuration |
Configuration with ETS |
*: Value with Clipsal mechs 5031 connected
Reviews
There are no reviews yet.